info@cpapstudio.co.uk
+44 7899 539620
ResMed AirFit F30i Non-Magnetic Full Face CPAP Mask
ResMed AirFit F30i Non-Magnetic Full Face CPAP Mask
The ResMed AirFit F30i Non-Magnetic Full Face CPAP Mask is a genuine ResMed mask built without magnetic headgear clips. It is intended for people who cannot use a mask containing magnets, while keeping the same under-the-nose cushion and top-of-the-head tube design as the standard AirFit F30i.
Who the non-magnetic version is for
ResMed masks with magnetic clips are contraindicated for some people with implanted medical devices or metallic implants. The warning can also apply when someone in close physical contact with the mask user has an affected implant or device.
This version uses conventional clips instead, so it may be suitable where a magnetic mask is not. If you are unsure whether the magnet warning applies to you, speak to your doctor and the manufacturer of your implant or device before ordering.
Key features
- No magnets – conventional headgear clips throughout.
- Under-the-nose cushion – seals beneath the nose and around the mouth, without covering the nasal bridge.
- Top-of-the-head tube connection – keeps tubing away from the front of the face and allows more freedom to change position.
- Quick-release elbow – disconnect from the tubing without removing the mask.
- 360° rotation – the elbow turns as you move.
- Open line of sight – wear glasses, read or watch television before sleep.
- Hollow conduit frame – therapy air travels through the frame to the cushion.
- Genuine ResMed product.
What's in the box
- AirFit F30i Non-Magnetic conduit frame
- AirFit F30i cushion (size as selected)
- Non-magnetic headgear
- Elbow
- User guide
Choosing your size
The AirFit F30i is sized by frame and cushion together. Because the cushion sits directly under the nose rather than over the bridge, choosing the right cushion size matters more than on a traditional full face mask. Select your combination from the options above.
Technical details
| Manufacturer | ResMed |
| Type | Full face mask |
| Contains magnets | No |
| Pressure range | 4–30 cm H2O |
| Material | Silicone, plastic, nylon/elastane |
| Made from latex | No |
| AirMini compatible | No |
| Warranty | 90 days |
Replacement parts
Individual AirFit F30i parts are available separately, so a worn cushion or headgear does not mean replacing the whole mask. Replacement cushions, headgear and conduit frames are all stocked.
Frequently asked questions
Does the AirFit F30i Non-Magnetic contain any magnets?
No. This version is supplied with non-magnetic headgear clips.
Is it different from the standard AirFit F30i in any other way?
No. The cushion, conduit frame, tube position and venting are the same. Only the headgear clips differ.
Does it cover the bridge of my nose?
No. The cushion sits underneath the nose and seals around the mouth, which is what gives the mask its wide field of vision.
Please read the current ResMed AirFit F30i user guide, including contraindications, warnings and precautions, before using this mask.
The specific warranty period applicable to a product will normally be stated on the individual product page within the product description.
Where a specific warranty period is stated on the product page, that warranty period will apply to that product.
Where no specific warranty period is stated on the product page, the following general CPAPstudio warranty periods will apply:
| Product Category | General Warranty Period | Coverage |
|---|---|---|
| New CPAP, APAP & BiPAP Machines | 2 Years | Manufacturing defects and functional faults during normal intended use |
| Reconditioned / Like-New CPAP, APAP & BiPAP Machines | 6 Months | Functional and manufacturing faults during normal intended use |
| CPAP Masks – Complete Mask Systems | 3 Months | Manufacturing defects only |
| Mask Frames | 3 Months | Manufacturing defects only |
| Mask Cushions & Nasal Pillows | 3 Months | Manufacturing defects only; normal deterioration is excluded |
| Mask Headgear & Straps | 3 Months | Manufacturing defects only; normal stretching and wear are excluded |
| Standard & Heated CPAP Tubing | 3 Months | Manufacturing defects only |
| Humidifier Water Chambers / Tubs | 3 Months | Manufacturing defects only |
| Separate / Reusable Humidifier Units | 1 Year | Manufacturing and functional defects |
| CPAP Batteries & Battery Packs | 6 Months | Manufacturing defects and covered battery failure during normal use |
| Power Supplies & AC Adapters | 2 Years | Manufacturing and electrical defects during normal intended use |
| Data Modules & Electronic Accessories | 1 Year | Manufacturing and functional defects |
| Filters | 30 Days | Manufacturing or supply defects only |
| Other CPAP Accessories & Replacement Parts | 3 Months | Manufacturing defects unless otherwise stated |
Important
The warranty periods shown in the table above are our general warranty periods and apply only where a different warranty period has not been specified on the individual product page.
If the product page states a different warranty period — whether shorter or longer — the warranty stated on the product page will apply, subject to your statutory consumer rights.
For example, if a particular CPAP machine is advertised with a 3-year warranty, that 3-year warranty will apply instead of the general 2-year period shown above.
Similarly, certain accessories, batteries or specialist products may have different warranty periods. Where this is the case, the applicable warranty will be clearly stated on the relevant product page.
Please check the warranty information in the product description before purchasing. If no specific warranty is shown, the general warranty periods in the table above will apply.
All warranty cover is provided in addition to your statutory consumer rights and does not exclude, restrict or replace those rights.
