If you are taking your CPAP machine with you to Europe, then a 2-pin power lead allows you to use it without requiring a converter or adapter.

Most CPAP machines use a figure-8 mains lead and accept voltages from 100V up to 240V. That makes purchasing the appropriate figure-8 lead for your destination the neatest and safest way of running your machine from the mains.

If you are taking your CPAP machine with you to Europe, then a 2-pin power lead allows you to use it without requiring a converter or adapter.

Most CPAP machines use a figure-8 mains lead and accept voltages from 100V an upwards. That makes purchasing the appropriate figure-8 lead for your destination the neatest and safest way of running your machine from the mains. 

This is a type-C plug, used in all European countries other than the UK, Ireland, Cyprus and Malta. It will also fit E, F, J, K or N sockets.

This cable is 2 metres long, and is compatible with all models the following machines:

• Philips DreamStation
• Philips System One
• Philips System One 60
• Philips M-Series
• ResMed AirSense 10
• ResMed S9
• ResMed S8
• DeVilbiss SleepCube / Intellipap
• DeVilbiss Blue / Intellipap 2
• Transcend Heated Humidifier

This cable is not compatible with the Fisher & Paykel Icon range (which have fixed leads) nor the Transcend range 

IMPORTANT: This is the mains plug only. Most of the CPAP machines listed above use a power brick – this is not included and if required must be ordered separately. A list of power supplies is here:

• Philips Respironics DreamStation
• Philips Respironics System One 60
• Philips Respironics System One
• ResMed power supplies are only available directly from ResMed. The power supply can be combined with this plug for European use.
• DeVilbiss SleepCube does not use a power brick; a mains lead is all that is required.