Lena Full Face Mask - Good for High Pressures

Lena Full Face Mask - Good for High Pressures

Description
Warranty
Product reviews
FAQs

This new Lena Full Face Mask by Lowenstein Medical has been developed especially for p high  Pressures and features a Dual Lipped Cushion to create a good mask seal.

This new Lowenstein Medical Lena Full Face Mask can  be used by all users, but Lowenstein have produced this mask especially for those on high pressures, thus helping prevent mask leakage. Lowenstein have particularly addressed the problem that can happen for  different pressures on Bi-Level and NIV with a higher inhale (IPAP) and exhale  to prevent movement of the mask.  

Features:-

Forehead cushion - broad surface distributes pressure evenly.

Forehead support - easy-to-use sliding element permits almost infinite adjustment.

Mask cushion - double lip for a perfect seal all round; new design with anatomically rounded, soft edges; varied structure on the surface ensures a good, lasting fit.

Connection for O2 feed - no adapter required 

Exhalation system - quiet and diffused flow for unimpaired wearing comfort

Elbow - vented with ball joint for complete freedom of movement; non-vented for valve circuit ventilation (not available on the website, but can be ordered by request).


The Lena Full Face Mask is supplied in either Small, Medium or Large.

There is also an optional 'Ripcord' Quick Release Cord for removing the mask quicker and easier, and an optional XL Headgear if needed.


IMPORTANT:-

The mask cushions are NOT interchangeable with the different sizes of mask.

The specific warranty period applicable to a product will normally be stated on the individual product page within the product description.

Where a specific warranty period is stated on the product page, that warranty period will apply to that product.

Where no specific warranty period is stated on the product page, the following general CPAPstudio warranty periods will apply:

Product Category General Warranty Period Coverage
New CPAP, APAP & BiPAP Machines 2 Years Manufacturing defects and functional faults during normal intended use
Reconditioned / Like-New CPAP, APAP & BiPAP Machines 6 Months Functional and manufacturing faults during normal intended use
CPAP Masks – Complete Mask Systems 3 Months Manufacturing defects only
Mask Frames 3 Months Manufacturing defects only
Mask Cushions & Nasal Pillows 3 Months Manufacturing defects only; normal deterioration is excluded
Mask Headgear & Straps 3 Months Manufacturing defects only; normal stretching and wear are excluded
Standard & Heated CPAP Tubing 3 Months Manufacturing defects only
Humidifier Water Chambers / Tubs 3 Months Manufacturing defects only
Separate / Reusable Humidifier Units 1 Year Manufacturing and functional defects
CPAP Batteries & Battery Packs 6 Months Manufacturing defects and covered battery failure during normal use
Power Supplies & AC Adapters 2 Years Manufacturing and electrical defects during normal intended use
Data Modules & Electronic Accessories 1 Year Manufacturing and functional defects
Filters 30 Days Manufacturing or supply defects only
Other CPAP Accessories & Replacement Parts 3 Months Manufacturing defects unless otherwise stated

Important

The warranty periods shown in the table above are our general warranty periods and apply only where a different warranty period has not been specified on the individual product page.

If the product page states a different warranty period — whether shorter or longer — the warranty stated on the product page will apply, subject to your statutory consumer rights.

For example, if a particular CPAP machine is advertised with a 3-year warranty, that 3-year warranty will apply instead of the general 2-year period shown above.

Similarly, certain accessories, batteries or specialist products may have different warranty periods. Where this is the case, the applicable warranty will be clearly stated on the relevant product page.

Please check the warranty information in the product description before purchasing. If no specific warranty is shown, the general warranty periods in the table above will apply.

All warranty cover is provided in addition to your statutory consumer rights and does not exclude, restrict or replace those rights.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

The Lena can be used by anyone, but Loewenstein Medical developed it especially for people on high pressures. Its dual-lipped cushion is designed to create a good seal and help prevent mask leakage, including on Bi-Level and NIV settings with a higher inhale (IPAP) and exhale pressure.

No. Lena mask cushions are not interchangeable between the different mask sizes. The mask is supplied in Small, Medium or Large.

Yes. There is an optional Ripcord quick release cord for removing the mask quicker and more easily, and an optional XL headgear if needed. A non-vented elbow for valve circuit ventilation is also available to order by request.

Yes. The Lena has a connection for an oxygen feed, and no adapter is required.