ResMed Mirage FX Nasal CPAP Mask with Standard Headgear

ResMed Mirage FX Nasal CPAP Mask

Description
Warranty
Product reviews
FAQs

The ResMed Mirage FX is a lightweight nasal mask built around simplicity: just four parts, a dual-wall cushion and an ultra-flexible forehead support. It is quick to fit, quick to strip down and quick to clean.

Key features

  • Spring Air dual-wall cushion – a soft outer wall seals against the skin while an inner wall holds its shape, so the mask adapts as you move.
  • Ultra-flexible forehead support – braces the mask with minimal skin contact.
  • SoftEdge headgear – flexible, breathable and soft against the skin, designed to reduce strap marks.
  • Quick-release system – detach the air tube without removing the mask, so you can get up in the night.
  • Intuitive adjustment – designed to achieve a good fit first time rather than through trial and error.
  • Only four parts – fast to disassemble, clean and reassemble.
  • Magnet free – no magnetic components anywhere in the mask.
  • Genuine ResMed product, supplied complete with headgear.

Who the Mirage FX suits

  • Nose breathers who want a straightforward, traditional nasal mask
  • Anyone who finds modern masks fiddly to assemble and clean
  • People who prefer a mask with forehead support for stability
  • Anyone who needs a magnet-free mask
  • Existing Mirage FX users replacing a worn mask

A slightly smaller version, the Mirage FX for Her, is also available with a smaller cushion and headgear.

What's in the box

  • Mirage FX mask frame with forehead support
  • Spring Air dual-wall cushion, standard size
  • SoftEdge headgear, standard size
  • Elbow
  • User guide

Technical details

Manufacturer ResMed
Mask type Nasal
Cushion Spring Air dual-wall silicone
Size Standard cushion, standard headgear
Pressure range 4–20 cm H2O
Material Silicone, plastic, nylon/lycra
Contains magnets No
Made from latex No
AirMini compatible No

Replacement parts

Mirage FX cushions, headgear, frames and elbows are all available separately. Replace the cushion every one to three months and the headgear every three to six months.

Frequently asked questions

What size is the Mirage FX?

This listing is the standard size, supplied with a standard cushion and standard headgear. For a smaller fit, see the Mirage FX for Her.

Does the Mirage FX contain magnets?

No. There are no magnetic components in this mask, so it is suitable if magnetic clips are contraindicated for you.

What pressure does it support?

Up to 20 cmH₂O. If you are prescribed a higher pressure, a full face mask such as the Quattro Air will be more suitable.

How many parts does it have?

Four — frame, cushion, headgear and elbow. That is the reason it is quick to clean and hard to reassemble incorrectly.

Will it work with my CPAP machine?

Yes. It uses a standard mask connection and works with ResMed, Philips, Löwenstein and other CPAP and bilevel devices. Set your machine's mask type to "Nasal".

Please read the current ResMed Mirage FX user guide, including contraindications, warnings and precautions, before using this mask. Ask your doctor about using this medical device to treat your obstructive sleep apnoea.

The specific warranty period applicable to a product will normally be stated on the individual product page within the product description.

Where a specific warranty period is stated on the product page, that warranty period will apply to that product.

Where no specific warranty period is stated on the product page, the following general CPAPstudio warranty periods will apply:

Product Category General Warranty Period Coverage
New CPAP, APAP & BiPAP Machines 2 Years Manufacturing defects and functional faults during normal intended use
Reconditioned / Like-New CPAP, APAP & BiPAP Machines 6 Months Functional and manufacturing faults during normal intended use
CPAP Masks – Complete Mask Systems 3 Months Manufacturing defects only
Mask Frames 3 Months Manufacturing defects only
Mask Cushions & Nasal Pillows 3 Months Manufacturing defects only; normal deterioration is excluded
Mask Headgear & Straps 3 Months Manufacturing defects only; normal stretching and wear are excluded
Standard & Heated CPAP Tubing 3 Months Manufacturing defects only
Humidifier Water Chambers / Tubs 3 Months Manufacturing defects only
Separate / Reusable Humidifier Units 1 Year Manufacturing and functional defects
CPAP Batteries & Battery Packs 6 Months Manufacturing defects and covered battery failure during normal use
Power Supplies & AC Adapters 2 Years Manufacturing and electrical defects during normal intended use
Data Modules & Electronic Accessories 1 Year Manufacturing and functional defects
Filters 30 Days Manufacturing or supply defects only
Other CPAP Accessories & Replacement Parts 3 Months Manufacturing defects unless otherwise stated

Important

The warranty periods shown in the table above are our general warranty periods and apply only where a different warranty period has not been specified on the individual product page.

If the product page states a different warranty period — whether shorter or longer — the warranty stated on the product page will apply, subject to your statutory consumer rights.

For example, if a particular CPAP machine is advertised with a 3-year warranty, that 3-year warranty will apply instead of the general 2-year period shown above.

Similarly, certain accessories, batteries or specialist products may have different warranty periods. Where this is the case, the applicable warranty will be clearly stated on the relevant product page.

Please check the warranty information in the product description before purchasing. If no specific warranty is shown, the general warranty periods in the table above will apply.

All warranty cover is provided in addition to your statutory consumer rights and does not exclude, restrict or replace those rights.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Paul Opel

I've been using this mask for years and it's the only one that fits me comfortably every time.

Yes. It has an ultra-flexible forehead support that braces the mask with minimal skin contact, which suits people who prefer forehead support for stability.

It is a cushion with a soft outer wall that seals against the skin and an inner wall that holds its shape, so the mask adapts as you move.

The Mirage FX mask frame with forehead support, a Spring Air dual-wall cushion in standard size, SoftEdge headgear in standard size, an elbow and a user guide.

The quick-release system lets you detach the air tube without removing the mask, so you can get up in the night. The Mirage FX is not AirMini compatible.